Table of Contents
Advertisement
6.2 Rear Panel
INPUT
① INPUT 1~4: Connect to HDMI source equipment such as media
players, game consoles or set-top boxes. DVI sources are supported
with the use of an HDMI to DVI adapter.
② OUTPUT A~D: Connect to HDMI TVs, monitors or amplifiers for digital
video and audio output.
③ IR IN: Connect to the provided IR Extender to extend the IR control range of
the unit. Ensure that the remote being used is within direct line-of-sight of
the IR Extender.
④ RS232: Connect directly to a PC, laptop or other serial control device to
send RS-232 commands to control the unit.
⑤ Control: Connect directly, or through a network switch, to your PC/ laptop to
control the unit via telnet/WebGUI.
⑥ ERVICE: This slot is reserved for firmware update use only.
⑦ C 24V: Plug the 24V DC power adapter into the unit and connect it to an AC
wall outlet for power.
3
OUTPUT
C
IR IN
HDMX44-18G Matrix
DC 24V
SERVICE
4
5
4
Advertisement
Table of Contents
