Table of Contents
Advertisement
HDMX44-18G
6.7 Telnet Control
the PC/Laptop are connected to the same active networks.
To access Telnet in Windows 7, click on the "Start" menu and type "cmd" in
the search field, then press "Enter".
Under Windows XP go to the "Start" menu, click on "Run", type "cmd" then press
"Enter".
Under Mac OS X, go to Go→Applications→Utilities→Terminal
See below for reference.
Once in the CLI (Command Line Interface) type "telnet" followed by the IP address
of the unit (and the port number if it is non-standard) and then hit "Enter".
11
Advertisement
Table of Contents
