Perle IDS-305F Quick Start Manual

Hide thumbs Also See for IDS-305F:

____________________________

This guide covers the basic installation and configuration. It is intended for first time

setup or for product evaluation purposes.

Complete details can be found in the following guides at www.perle.com/downloads.



IDS-305F Hardware Installation Guide



IDS Managed Switches User Guide – Pro Feature Set



IDS Managed Switches CLI Guide – Pro Feature Set

What's in the box?



The IDS switch



A Quick Start Guide (this document)

Hardware Overview

IDS-305F Switches

Quick Start Guide

Table of Contents

Need help?

Do you have a question about the IDS-305F and is the answer not in the manual?

Page 1 Quick Start Guide ____________________________ This guide covers the basic installation and configuration. It is intended for first time setup or for product evaluation purposes. Complete details can be found in the following guides at www.perle.com/downloads.  IDS-305F Hardware Installation Guide ...
Page 2 Connecting a fiber device Connect LC, SC or ST fiber cable from the device to the IDS switch. Connecting Ethernet Connect network or devices to Ethernet ports (1-4) using Cat5/5e Ethernet cables IDS-305F Switches Quick Start Guide P/N 5500357-10 (Rev A)
Page 3  100 Mbps Green on, Yellow on  10 Mbps Green off, Yellow on Note: Flashing indicates activity Note: Alr (Alarm), BC (Backup Coupling), RM (Ring Master) see Hardware Installation Guide IDS-305F Switches Quick Start Guide P/N 5500357-10 (Rev A)
Page 4 The PC can now be reset to its normal network address and the switch can now be accessed using the conventional IP addressing. ©2016 Perle Systems Limited. All rights reserved. IDS-305F Switches Quick Start Guide P/N 5500357-10 (Rev A)