Related Manuals for ESI AA355DS
Summary of Contents for ESI AA355DS
- Page 1 AA355DS ARTICULATING KEYBOARD ARM Model AA355DS AA355DS Rev A 4/17 INSTALLATION AND USE...
- Page 2 AA355DS ARTICULATING KEYBOARD ARM PLEASE REVIEW these instructions before beginning the installation. Check that all parts needed were provided with your order. Contact your supplier if any operates to your satisfaction. PARTS PROVIDED Articulating Arm (1) Track (1) Template (1) Front Stop (1) "...
- Page 3 AA355DS ARTICULATING KEYBOARD ARM STEP 2: Attach Track • Remove the template and install two " wood screws into the pilot holes. — Leave a gap of approximately " between the head of each screw and the work surface • Slide the track onto the screws, using the keyholes in the track. Tighten the screws.
- Page 4 AA355DS ARTICULATING KEYBOARD ARM STEP 3: Install Articulating Arm • Slide the articulating arm onto the track. Position it back far enough so that you have access to the front two recessed holes on the track. Slide Back STEP 4: Attach Front Stop •...
- Page 5 AA355DS ARTICULATING KEYBOARD ARM OPERATION To Raise: • Grasp both sides of the platform and raise to the desired height. To Lower: • Grasp both sides of the platform, tilt up the front, and move down to the desired height.
- Page 6 800.833.3746 esiergo.com © 2017 ESI Ergonomic Solutions. All rights reserved. AA355DS Rev A 4/17...
Need help?
Do you have a question about the AA355DS and is the answer not in the manual?
Questions and answers