Download Print this page

ESI AA100 Installation And Use

Articulating keyboard arm

Advertisement

Quick Links

AA100
ARTICULATING KEYBOARD ARM
Model AA100
AA100 Rev A 4/17
INSTALLATION AND USE

Advertisement

loading

Summary of Contents for ESI AA100

  • Page 1 AA100 ARTICULATING KEYBOARD ARM Model AA100 AA100 Rev A 4/17 INSTALLATION AND USE...
  • Page 2 AA100 ARTICULATING KEYBOARD ARM PLEASE REVIEW these instructions before beginning the installation. Check that all parts needed were provided with your order. Contact your supplier if any operates to your satisfaction. PARTS PROVIDED Articulating Arm (1) Track (1) Front Stop (1)
  • Page 3 AA100 ARTICULATING KEYBOARD ARM STEP 2: Attach Track • First attach the track through the four center holes, as shown. Attach Through • Then attach the track Four Center Holes extender through the two rear holes. • Do not attach a screw through the front center hole at this time.
  • Page 4 • Grasp both sides of the platform and raise to the desired height. To Lower: • Grasp both sides of the platform, tilt up the front, and move down to the desired height. 800.833.3746 esiergo.com © 2017 ESI Ergonomic Solutions. All rights reserved. AA100 Rev A 4/17...