Gestetner DSc545 Printer Reference page 37

G
Select the machine model you want to use.
The printer name can be changed in the [Change settings for 'Printer Name'] box.
H
Double-click the printer name to display the printer settings.
The details shown in [Comment:], [Driver:], and [Port:] vary depending on the
operating system, printer model, and port.
I
Click [Port:], and then click [Add].
J
Click [SmartDeviceMonitor], and then click [OK].
K
Click [IPP].
L
In the [Printer URL] box, enter "http://printer's address/printer" as the print-
er's address.
If the server authentication is issued, to enable SSL (a protocol for encrypted
communication), enter "https://printer's address/printer" (Internet Explor-
er 5.01, or a higher version must be installed).
(example IP address: 192.168.15.16)
http://192.168.15.16/printer
https://192.168.15.16/printer
You can enter "http://printer's address/ipp" as the printer's address.
M
Enter a name for identifying the printer in [IPP Port Name]. Use a name dif-
ferent from the one of any existing port.
If a name is not specified here, the address entered in the [Printer URL] box be-
comes the IPP port name.
N
Click [Detailed Settings] to make necessary settings.
For information about the settings, see SmartDeviceMonitor for Client Help.
O
Click [OK].
P
Check that the port of the selected printer is displayed in [Port:].
Q
Set a user code, if necessary.
Up to 8 numeric characters can be entered. No alphabetic characters or sym-
bols can be entered.
R
Select the [Default Printer] check box to configure the printer as default.
S
Click [Continue].
Installation starts.
T
After the installation is completed, select one of the options to restart the
computer either now or later, and then click [Finish].
Restart the computer to complete installation.
Installing the Printer Driver
1
29