Duplex Printing - Gestetner DSc224 Operating Instructions Manual

Duplex Printing

Use this function to select duplex printing.
Limitation
❒ To use this function, the optional Duplex Unit must be installed on the ma-
chine.
The following table shows the tabs or menus where you can select this function.
Windows 95/98/Me
Windows 2000/XP
Windows NT 4.0
Macintosh
You can select the following items. The following items may vary depending on
the operating system you are using.
Windows 95/98/Me
❖ ❖ ❖ ❖ Off
Disables Duplex Printing.
❖ ❖ ❖ ❖ Open to Left
Prints output so that you can open it to the left when bound along the left
edge.
❖ ❖ ❖ ❖ Open to Top
Prints output so that you can open it to the top when bound along the top
edge.
Windows 2000/XP, Macintosh
Note
❒ If you use a Macintosh, click to select the button that means [Flip on Long Edge]
or [Flip on Short Edge].
❖ ❖ ❖ ❖ None
Disables Duplex Printing.
❖ ❖ ❖ ❖ Flip on Short Edge
Prints output so that you can open it to the short edge when bound along the
short edge.
❖ ❖ ❖ ❖ Flip on Long Edge
Prints output so that you can open it to the long edge when bound along the
long edge.
[Duplex] on the [Setup] tab.
[Print on Both Sides (Duplex)] on the [Layout] tab in the
Printing Preferences dialog box.
[Print on Both Sides (Duplex Printing)] on the [Page Setup] tab
in the Document Default dialog box.
[Print on Both Sides] on [Layout] in the print dialog box.
Setting up Options
9
1