Staple; User Code - Gestetner DSc224 Operating Instructions Manual

Using PostScript 3

Staple

Use this function to staple sheets of printed paper together.
1
Limitation
❒ When stapling, use the finisher option. See the Copy Reference or the Printer
Reference 2.
Note
❒ For more information about the stapling location, see "Staple", Printer Refer-
ence 2.
The following table shows the tabs or menus where you can select this function.
Windows 95/98/Me
Windows 2000/XP
Windows NT 4.0
Macintosh

User Code

Use this to set a user code for print logging.
Enter a user code using up to eight digits. A user code identifies a group of users
and allows you to check the number of sheets printed under each code with
SmartNetMonitor for Admin.
The following table shows the tabs or menus where you can select this function.
Windows 95/98/Me
Windows 2000/XP
Windows NT 4.0
Macintosh
Note
❒ The "User Code" can consist of up to eight alphanumeric (a-z, A-Z, 0-9) char-
acters.
Reference
For more information about using SmartNetMonitor for Admin, see the Help
file.
18
[Staple] on the [Setup] tab.
[Printer Features] on [Advanced] on the [Paper/Quality] or
[Layout] tab.
[Printer Features] on [Document Options] on the [Advanced]
tab.
[Printer Specific Options] in the print dialog box.
[User Code] on the [Statistics] tab.
[User Code] on the [Job/Log] tab in the Printing Preferenc-
es dialog box.
[User Code] on the [Job/Log] tab in the Printer Properties
dialog box.
[User Code] on [Job Log] in the print dialog box.