Table of Contents
Advertisement
8. Type the Wi-Fi network password and tap Next. The app accesses the Wi-Fi network and adds
the camera. This process can take up to 60 seconds.
9. To switch the camera between a wired or a wireless configuration:
a. Press and hold the Reset button on the bottom of the camera for eight seconds.
b. Repeat steps 6 through 8 of this procedure. At step 6, choose either Wired or Wireless
depending on the new connection.
10
Advertisement
Table of Contents
Need help?
Do you have a question about the DH-IPC-HFW11A0SN-W and is the answer not in the manual?