Table of Contents
Advertisement
2.34
G
ETTING
Downloaded from ManualsPrinter.com Manuals
9
Click Finish.
Installing Software for Network Printing
When you connect your printer to a network, you must first
configure the TCP/IP settings for the printer. After you have
assigned and verified the TCP/IP settings, you are ready to
install the software on each computer on the network.
You can install the printer software using the typical or custom
method.
Typical Installation for Network Printing
This is recommended for most users. All components (Printer
Driver, Scanner Driver, Network Scan, Set IP, Multi Direct Print
Type S IPP port) necessary for printer operations will be
installed.
In Windows 98/Me and NT 4.0, Multi Direct Print Type S will be
installed as a network printer port, too.
1
Make sure that the printer is connected to your network and
powered on. For details about connecting to the network,
see "Basic TCP/IP Settings" on page 1-3 of the
Administrator Guide.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
S
TARTED
Advertisement
Table of Contents
