Troubleshooting; If Your Machine Does Not Operate As You Want - Gestetner CP6143L Operating Instructions Manual

C2678608_Platinum-EN.book Page 67 Sunday, February 12, 2006 10:53 PM
If Your Machine Does Not Operate as You
Want
The following chart gives explanations of common problems and messages. If
other messages appear, follow the instructions displayed. If a malfunction or a
misfeed occurs, the following messages will appear on the display.
❖ When a Message is Displayed
Message
Set original.
Set the Drum
Unit correctly.
Set the Master
Eject Box cor-
rectly.
Auto-shutdown
occurred due to
power problems.
Press OK to exit.

4. Troubleshooting

Causes
You have not changed the origi-
nal on the exposure glass before
pressing the {Start} key.
Original is not placed.
The drum unit is not set correctly. Slide in the drum until it clicks.
The master eject box is not set
correctly.
The power problem is occurred. Press {OK} key.
Solutions
Place the next original on the ex-
posure glass or in the ADF.
Place your originals.
Make sure that the drum is com-
pletely set in position.
Make sure that the master eject
box is completely set in position.
If it occurs frequently, contact
your customer service.
67