User Tools
User Codes
If the machine is set to use the User
Code function, operators must enter
their user codes before the machine
can operate. The machine keeps count
of the number of prints made under
each user code.
In this mode, the following 20 user
codes (fixed) can be used to access the
3
machine: 382, 191, 182, 173, 164, 155,
146, 137, 128, 119, 482, 291, 282, 273,
264, 255, 246, 237, 228, 219
Note
❒ To prevent unauthorized users
from accessing the machine, note
down the codes and then black out
the codes from this manual.
How to Set User Code Mode (#
120)
The following procedure explains
how to set user code mode. This must
be done before a user code can be en-
tered.
A A A A
Press the { { { { Clear Modes/Energy Sav-
er} } } } key.
76
B B B B
Hold down the { { { { Clear/Stop} } } } key
for at least 3 seconds.
C C C C
Enter "120" with the number keys
and press the { { { { q
q } } } } key.
q
q
D D D D
Enter "1" (Yes) with the number
keys and then press the { { { { q
q } } } } key.
q
q
DRAFT 2002/08/02