Table of Contents
Advertisement
Troubleshooting
R CAUTION:
• Be careful not to cut yourself on any sharp edges when you reach inside the
machine to remove misfed sheets of paper or masters.
Note
❒ To prevent misfeeds, do not leave any torn scraps of paper within the ma-
chine.
❒ When clearing misfeeds, do not turn off the main switch. If you do, your copy
settings are cleared.
❒ If misfeeds occur repeatedly, contact your service representative.
❖ ❖ ❖ ❖ When the open cover/unit indicator (M
Monitor
Guidance Display and Action
M
CLOSE THE COVER
• Close the original tray unit.
5
• Close the front door.
CLOSE THE PLOTTER COVER
• Close the right side cover and the
CLOSE THE ADF COVER
• Close the optional ADF unit.
SET THE DRUM COMPLETELY
❖ ❖ ❖ ❖ When the supply/exchange indicators light
Monitor
Guidance Display and Action
B
LOAD MORE PAPER
j
LOAD NEW INK CARTRIDGE
C
LOAD NEW MASTER ROLL
k
EMPTY MASTER EJECT BOX
• Remove the used master.
SET THE MASTER EJECT BOX
❖ ❖ ❖ ❖ When other indicators light
Monitor
Guidance Display and Action
u
SET THE KEY COUNTER
92
plotter cover.
M ) lights
M
M
Page
⇒ p.107 "When the Open Cover/Unit In-
dicator (M) Lights".
⇒ p.107 "When the Open Cover/Unit In-
dicator (M) Lights".
Page
⇒ p.83 "Loading Paper into the Paper
Feed Tray".
⇒ p.85 "When the Add Ink Indicator (j)
Lights".
⇒ p.87 "Master Roll Replacement".
⇒ p.109 "When the Master Eject Indicator
(k) Lights".
Page
⇒ p.110 "When Other Indicators Light".
DRAFT 2002/08/02
Advertisement
Table of Contents
