About Your Projector; Remote Control - Panasonic PT-VX610 Operating Instructions Manual

About your projector

Remote control

1 Remote control signal transmitter
2 Power <v/b> button (v standby / b power on)
Sets the projector to the state where the projector is switched
off (standby mode). Also starts projection when the power is
switched off (standby mode).
3 Input selection buttons (<COMPUTER 1> / <COMPUTER 2> /
<VIDEO> / <HDMI 1> / <HDMI 2>)
Switches the input signal to project. (
4 <MENU> button / <RETURN> button / asqw buttons /
<ENTER> button
Used to operate the menu screen. (
The asqw buttons are also used to enter password or
characters for [SECURITY].
5 <FREEZE> button
Pauses the projected image and mute the audio temporarily.
( Æ page 49)
6 Number (<1> - <6>) buttons
Used for entering an ID number in a multiple projector
environment or a password.
7 <AUTO SETUP> button
Used to perform automatic adjustment while projecting the
image. ( Æ page 49)
8 <MUTE> button
Used to temporarily mute the projector. (
22 - ENGLISH
Chapter 1 Preparation - About your projector
Front
1
2
3
4
5
6
Æ
page 44)
Æ page 53)
Æ page 48)
7
10
11
8
9
12
13
9 <AV MUTE> button
Used to turn off the audio and video temporarily. (
10 <FUNCTION> button
Assigns a frequently used operation as a shortcut button.
( Æ page 50)
11 <DEFAULT> button
Resets the content of the sub-menu to the factory default.
Æ
( page 54)
12 <D.ZOOM +> button / <D.ZOOM -> button
Zooms in and out the images. (
13 <VOL +> button / <VOL -> button
Adjusts the volume level of the built-in speaker or the audio
output. ( Æ page 48)
14 <ID SET> button
Sets the ID number of the remote control in a multiple projector
Æ
environment. (
15 <ID ALL> button
Used to simultaneously control all the projectors with one
remote control when using multiple projectors. (
16 <P-TIMER> button
Operates the presentation timer function. (
17 <SCREEN ADJ> button
Corrects the distortion of the projected image.
( Æ page 49)
14
15
16
17
Æ
page 50)
page 26)
Æ
Æ
page 51)
Æ
page 48)
page 26)