Bevel Cuts - Bosch GCM12SD Operating/Safety Instructions Manual

BM 2610007877 08-10:BM 2610007877 08-10.qxp 8/24/10 1:05 PM Page 39
What's a Bevel Cut – Saw features
A "bevel cut" is a cross-cut made with the blade
perpendicular to the fence and with the table set at
0° miter. The blade can be tilted to any angle
within the saw's range: the left is 0 to 47° and the
right is 0 to 47°.
The bevel scale is sized and positioned for easy
reading – see Figure 48.
Saw Operations
BEVEL SCALE INFORMATION
Watch While Tilting to Right
"30" positions are for
cutting 45° "spring angle"
crown molding flat on table
figure 48. Bevel Scale Information

Bevel Cuts

Watch While Tilting to Left
"33.9" positions are for cutting 38° "spring angle"
crown molding flat on table
Note: Saw has a 33.9 detent feature to automatically
hold it at this bevel angle setting
39.