Bevel Cuts - Bosch CM10GD Operating/Safety Instructions Manual

BM 2610027879 07-13_BM 2610027879 07-13.qxp 7/8/13 9:52 AM Page 39
What's a Bevel Cut – Saw features
•
A "bevel cut" is a cross-cut made with the blade
perpendicular to the fence and with the table set
at 0° miter. The blade can be tilted to any angle
within the saw's range: the left is 0 to 47° and the
right is 0 to 47°.
•
The bevel scale is sized and positioned for easy
reading – see Figure 48.
"30" positions are for
cutting 45° "spring angle"
crown molding flat on table
Note: when performing right and left bevel cuts it is necessary to move the sliding fence away from the blade to
avoid cutting into the fence. When compound cutting on the right it will be necessary to remove the right siding
fence – see page 29.
Saw Operations

Bevel Cuts

BEVEL SCALE INFORMATION
Watch While Tilting to Right
figure 48. Bevel Scale Information
Watch While Tilting to Left
"33.9" positions are for cutting 38° "spring angle"
crown molding flat on table
Note: Saw has a 33.9 detent feature to automatically
hold it at this bevel angle setting
39.