Sata (Serial Ata) Connector; Sata (Serial Ata) Power Connector - DFI KU553 User Manual

SATA (Serial ATA) Connector

Features
• 1 Serial ATA 3.0 port with data transfer rate up to 6Gb/s
• Integrated Advanced Host Controller Interface (AHCI) controller
The Serial ATA connector is used to connect the Serial ATA device. Connect one end of the Se-
rial ATA data cable to a SATA connector and the other end to your Serial ATA device.
BIOS Setting
Configure the Serial ATA drive in the Advanced menu ("SATA Configuration" submenu) of the
BIOS. Refer to Chapter 3 for more information.
Chapter 2 Hardware Installation
3
GND
TXP
TXN
GND
RXN
RXP
GND
SATA 0
6Gb/s
SATA 3.0
Chapter 2

SATA (Serial ATA) Power Connector

The SATA power connector supplies power to the SATA drive. Connect one end of the provided
power cable to the SATA power connector and the other end to your storage device.
20
3
SATA
Power
4
5V
Ground
Ground
+12V
1
www.dfi .com