Rear Panel I/O Ports; 9~36V Dc-In - DFI KU553 User Manual

Rear Panel I/O Ports

USB 3.0
LAN 1
DC-in
The rear panel I/O ports consist of the following:
• 1 9~36V DC-in connector
• 4 USB 3.0
• 2 GbE (RJ-45)
• 1 VGA
• 1 DP++
Chapter 2 Hardware Installation
Chapter 2
LAN 2
VGA
DP++

9~36V DC-in

DC-in
4 3
12V3
12V4
GND2 GND1
2 1
This 4-pin right angle connector is considered a low power solution. Connect a DC power cord
to this connector. Using a voltage more than the recommended range may fail to boot the sys-
tem or cause damage to the system board.
The 4-pin right-angle connector on the system board co-lays with a DC-in jack (optional) or
4-pin vertical type connector (optional) as the photo displayed below.
4-pin Right Angle
Connector (default)
14
3
4-pin Vertical Type Connector
(optional)
DC-in Jack (optional)
www.dfi .com