Usb Ports - DFI KU553 User Manual

USB Ports

USB 1-2
USB 3-4
USB 3.0
The USB device allows data exchange between your computer and a wide range of simultane-
ously accessible external plug and play peripherals.
The system board is equipped with 4 onboard USB 3.0 ports (USB 1-2/3-4). The 10-pin con-
nector allows you to connect 2 additional USB 2.0 ports (USB 7-8). The additional USB ports
may be mounted on a card-edge bracket. Install the card-edge bracket to an available slot at
the rear of the system chassis and then insert the USB port cables to a connector.
BIOS Setting
Configure the onboard USB in the Advanced menu ("USB Configuration" submenu) of the
BIOS. Refer to Chapter 3 for more information.
Wake-On-USB Keyboard/Mouse
The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or USB mouse
to wake up a system from the S3 (STR - Suspend To RAM) state.
Chapter 2 Hardware Installation
Chapter 2
3
USB 7-8
10
ID
GND GND
+Data0
+Data1
-Data1 -Data0
VCC VCC
2 1
USB 2.0
16
www.dfi .com