System Cpu; System Memory - DFI KU553 User Manual

System CPU

The system board is equipped with a Kabylake-U microprocessor in socket BGA compatible
package 1356.
Chapter 2 Hardware Installation
Chapter 2
Important:
Electrostatic discharge (ESD) can damage your board, processor, disk drives, add-in
boards, and other components. Perform installation procedures at an ESD workstation
only. If such a station is not available, you can provide some ESD protection by wear-
ing an antistatic wrist strap and attaching it to a metal part of the system chassis. If
a wrist strap is unavailable, establish and maintain contact with the system chassis
throughout any procedures requiring ESD protection.

System Memory

Important:
When the Standby Power LED is red, it indicates that there is power on the system
board. Power-off the PC then unplug the power cord prior to installing any devices.
Failure to do so will cause severe damage to the motherboard and components.
Features
• One 260-pin SODIMM up to 16GB
• Single Channel DDR4 1866/2133MHz
10
3
DDR4
Standby
Power
LED
www.dfi .com