Table of Contents
Advertisement
To set the original in the document feeder
A Set a stack of originals in the document feeder, then press the {Start} key.
Note
The last page should be on the bottom.
To set the original on the exposure glass or in the document feeder using
Batch(SADF) mode
Reference
See
P.32 "Batch (SADF) mode".
A Set the original, then press the {Start} key.
Note
Start with the first page to be copied.
B When it has been scanned in, set the next original, then press the {Start}
key.
Note
Set the original in the same direction as the first one.
C After all originals have been scanned, press the {#} key.
The copies are delivered to the tray.
Note
When you wish to return the copying display, press the [Copying] key on
the display panel.
Editing Job Preset
A
Press the [Job List] key.
Job Preset
2
61
Advertisement
Table of Contents
