Ftp Printing; Ftp Printing Using Netscape - Gestetner 1502 Owner's Manual

Choose File -> Open.
3.
The Open dialog box opens.
Enter the print server's IP address to access the print server's TCP/IP
4.
Configuration Menu.
Choose TCP/IP Configuration from the main menu.
5.
The NetBIOS Name for the print server is shown on this screen. The default name
is the Network Interface Board serial number (six digits with a three-letter prefix)
unless you have previously configured a name for the print server with DHCP.
Optionally, specify a new NetBIOS name (15 characters or less).
6.
7. If you have previously configured a DHCP Server to provide the print server with
the IP address of the Primary WINS Server, the address is shown on the TCP/IP
Configuration Menu. Otherwise, specify the IP address of the Primary NetBIOS
Name Server here.
Optionally specify the IP address of a Secondary NetBIOS Name Server as well.
8.
If you have configured your DHCP Server to provide the address of a Secondary
WINS Server to the print server, the address fields are automatically completed
for you.
Reboot the printer/print server.
9.
The printer's status page now shows that the print server has successfully
registered with the WINS server. The check boxes labeled "Primary Server
Logged in" and "Secondary Server Logged in" on the TCP/IP
Configuration Menu now indicate any WINS Servers with which the print server
has registered.
Normally, the print server automatically renews its registration with the WINS
Server before its lease expires.

7.5 FTP Printing

7.5.1 FTP Printing Using Netscape

FTP printing with Netscape requires Navigator 2.0 or higher.
To print from Netscape:
1. Connect to the port you want to send the print job to on your print server.
TCP/IP Configuration
7.5 FTP Printing
7-7