MuxLab 500401-WP-US Quick Installation Manual

Specifications
HDMI 1.3a
Environment
DVD, plasma, projectors, monitors, TV, PC, laptops, servers supporting
Devices
HDMI. Not compatible with MuxLab p/n 500400.
Transparent to the user
Transmission
225MHz
Bandwidth
HDMI 1.3a protocol
Signals
HDMI receptacle.
Connectors
Two (2) RJ45S for Cat5 unshielded or shielded twisted pair.
HDMI cables not included.
Power Switch Switch on rear panel to select between Power or No-Power. Factory setting:
Power
Max. Distance* 480i/p:
720p, 1080i:
*Based on a maximum length 1080p 8-bit:
of 6.6 ft (2m) of HDMI cable 1080p 12-bit Deep Color:
per end "No Power" Mode:
When installed in an electrically noisy environment, STP cable must be
used. Also, cross-connection reduces the effective distance depending on
the grade of twisted cable used. Patch panels are not recommended with
1080p Deep Color.
RJ45 Pin Configuration RJ45 A (Video)
Reverse Polarity Sensitive Pin 1 (R)
Use EIA/TIA 568 A or B, Pin 3 (R)
straight-through wiring. Pin 4 (R)
Pin 7 (R)
RJ45 B (DDC)
Pin 1 (R)
Pin 3 (R)
Pin 4 (R)
Pin 7 (R)
Cable Two (2) Category 5e or better twisted pair cables required.
Power Supply One (1) 110-240V/12VDC power supply with interchangeable blades
Power Consumption 3W
Temperature Operating: 0º to 55º C. Storage:-20º to 85º C. Humidity: up to 95% non-
condensing.
Enclosure ABS fire retardant plastic, Color white, Finish glossy.
Dimensions 4.1" (104 mm) x 1.8" (45.7 mm) x 1.44" (36.6 mm). Choose 1.6" (40 mm)
deep back box to allow for Cat 5E/6 wiring connection.
Weight 1.6 LB/0.7 Kg
Mounting Velcro pads included.
Compliance Regulatory: FCC, CE, RoHS, European Standard for 86 mm faceplate.
Flammability: 94V0
Warranty 2 years
Order Information 500401-WP-US HDMI Wall Plate Extender Kit
UPC: 6-27699-92401-3
Tel.: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: videoease@muxlab.com URL:
94-000697-B
© MuxLab Inc. 2010-2013
Cat5e: 300 ft (90 m) Cat6: 300 ft (90 m)
Cat5e: 200 ft (60 m) Cat6: 250 ft (76 m)
Cat5e: 150 ft (45 m) Cat6: 200 ft (60 m)
not specified Cat6: 90 ft (27 m)
Cat5e: 100 ft (30m) Cat6: 100 ft (30m)
Pin 2 (T)
Pin 6 (T)
Pin 5 (T)
Pin 8 (T)
Pin 2 (T)
Pin 6 (T)
Pin 5 (T)
Pin 8 (T)
www.muxlab.com
Overview
The HDMI Wall Plate Extender Kit Wall Plate (500401-WP-US) allows HDMI
equipment to be connected up to 200 ft (60m) @ 1080i via two (2) Cat5e unshielded
twisted pair cables in a point-to-point configuration. The product also supports
1080p Deep Color up to 90 ft (27m) via Cat6 cable. The kit comes with one (1)
Transmitter and one (1) Receiver. The receiver balun features a switch that allows
the device to function without a PSU connected. Applications include; commercial
and residential AV systems, classroom projector systems, digital signage,
boardroom systems, collaborative PC systems, medical information systems.
Pre-Installation Check
Identify
the connectors on the Transmitter (Source side) and Receiver (Display side). The
Source side has an HDMI In connector. The Display side has an HDMI Out connector, two
LED indicators for Power and Sync, and a Power Supply connector.
SE-000697-B
HDMI Wall Plate Extender Kit
(500401-WP-US)
Quick Installation Guide