MuxLab 500409 Quick Installation Manual

Specifications

Environment HDMI 2.0
Devices DVD, plasma, projectors, monitors, TV, PC, laptops, servers
supporting HDMI.
Transmission Transparent to the user
Bandwidth 594MHz
Signals HDMI 2.0 and HDCP 2.2
Connectors One (1) HDMI receptacle.
One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.
One (1) 3.5mm jacks for 1-way IR (emitter or sensor) (IR port
supports carrier wave from 38 to 60KHz)
Note: HDMI cables not included.
Maximum Distance 30m (100ft) at 4K/60 (4:4:4) uncompressed over Cat 6a/7
40m (130ft) at 4K/30 (4:4:4) uncompressed over Cat 6a/7
Based on a maximum
45m (148ft) at 1080p/60 uncompressed over Cat 6a/7
length of 6.6 ft (2 m) of
Note: When installed in an electrically noisy environment, an
HDMI cable per end.
STP cable must be used. Also, cross-connection reduces the
effective distance depending on the grade of twisted cable used.
RJ45 Pin Configuration RJ45 Link
Pin 1 (R) Pin 2 (T)
Reverse Polarity
Pin 3 (R) Pin 6 (T)
Sensitive. Use EIA/TIA
Pin 4 (R) Pin 5 (T)
568A or 586B straight-
Pin 7 (R) Pin 8 (T)
through wiring.
Cable One (1) Cat 6a/7 or better twisted pair cables required
Power Supply One (1) 110-240V/12VDC @ 2A with blade US, UK, Euro
Power Consumption 6 Watts
Temperature Operating: 0° to 40°C
Humidity: Up to 95% non-condensing
Enclosure Metal black
Dimensions 90 x 44 x 23 mm
Weight 1.02 lbs.
Compliance Regulatory: FCC, CE, RoHS
Warranty 2 years
Order Information 500409 HDMI / Bi-IR Extender Kit
2321 Rue Cohen, Montreal Quebec, Canada. H4R 2N7
Tel: (514) 905-0588
Toll Free (North America): (877) 689-5228
E-mail: info@muxlab.com
© MuxLab Inc.
Storage: -20° to 70°C
Fax: (514) 905-0589
URL: www.muxlab.com
94-000914-A SE-000914-A
HDMI Extender Kit
500409
Quick Installation Guide

Overview

The HDMI 2.0 Extender Kit allows HDMI equipment supporting uncompressed video
up to 4K/60 (4:4:4) resolutions to be connected over Cat6a/7 unshielded twisted pair
cable in a point-to-point configuration at distances up to 30m at 4K/60, 40m at 4K/30
and 45m at 1080p. The unit supports HDCP 2.2, and audio pass-through up to Dolby
Atmos & DTS:X. The HDMI 2.0 Extender Kit supports a 1-way IR port (carrier wave)
for remote control of end devices. The kit comes with one (1) Transmitter and one (1)
Receiver as well as an IR Emitter and IR Sensor for remote control applications.

Applications

Applications include commercial and residential AV systems, classroom projector
systems, digital signage, boardroom systems, collaborative PC systems, and medical
information systems.

Installation

1. Identify the connectors on the Transmitter and Receiver as indicated on the product
labels.Verify that the distance between the HDMI Transmitter and Receiver is
within MuxLab specifications (see Specifications table).
2. To install the Transmitter:
2a Connect the Transmitter to the HDMI video source with an HDMI compliant
cable.
2b Connect one (1) length of Cat 6 (or higher) grade UTP cables to
RJ45 LINK connectors on the Transmitter.
3. To install the Receiver:
3a Connect the Receiver to the HDMI display equipment with an HDMI
compliant cable.
3b Connect the one (1) Cat 6 cable to RJ45 LINK connectors on the
Receiver.
4. This kit supports PoC, allowing the Transmitter to power the Receiver, or the
Receiver to power the Transmitter. Connect the 12VDC power supply to either the
Receiver or Transmitter first, and then plug the power supply into an AC power
outlet. If power is present, the blue power LED of the Transmitter and the Receiver
will be ON.
Note: Power the HDMI Extender only after all connections are made.
5. Power the HDMI equipment and verify the image quality.
6. Connect the IR Sensor to the 3.5mm Stereo Jack of the receiver and the IR
Emitter to the 3.5mm Mono Jack of the Transmitter.