Cabling Examples - Genelec 7260A Operating Manual

The "REMOTE" RJ 11 connector can be used to connect the optional Remote Power/OVL LED (Genelec
7000-415) or 7000-416 Remote control switch for "Bypass" and "+10 dB LFE" functions.

Cabling examples

Stereo Pair with Subwoofer (AES/EBU Single-Wire)
This setup has one AES/EBU cable that carries both the Left and Right audio channels with subframe A
carrying the Left audio channel and subframe B carrying the Right audio channel.
Run one AES/EBU cable from the source to one of the subwoofer's "INPUT" connectors, then from the
corresponding "OUTPUT" connector to the "DIGITAL IN" connectors on the Left and Right loudspeakers
(the order of cabling to the loudspeakers is irrelevant). The correct subframe must be selected in each
loudspeaker.
Cable number
1
1
6
Subframe Audio
channel
A Left
B Right
Subwoofer Input Loudspeaker
Connector Input Connector
AES/EBU INPUT 1 DIGITAL IN
AES/EBU INPUT 1 DIGITAL IN