Icons Description; Signalling Led Description; Buttons Function - omi ESD Series Instruction And Maintenance Manual

6.1

Icons description

ICON
6.2

Signalling Led description

SIMBOL
6.3

Buttons function

Single buttons function
SYMBOL
Activates or deactivates unit operation when pressed for 3 seconds (ON/OFF).
When deactivated, the OFF message is displayed.
When the dryer is switched off using this button all digital outputs are disconnected.
Allows entry the "Functions Menu"
Pressed during normal operation displays the compressor oil temperature.
When pressed during programming mode, it scrolls the parameters list or increases the displayed value.
Pressed during normal operating displays the refrigerant circuit suction pressure.
When pressed during programming mode, it scrolls the parameters list or decreases the displayed value.
Pushed and released shows on display the SET POINT value.
In programming mode selects a parameter or confirms a value.
Not Used
Buttons combinations
Cod. 710.0159.01.00 Rev0A – 10.2011
DESCRIPTION
High / Low refrigerant discharge pressure Alarm (HP/LP)
Icon ON shows "Celsius degrees"
Icon OFF shows "Fahrenheit degrees"
Refrigerant compressor energized
(Blinking when start refrigerant compressor delay activated)
Suggested Maintenance
(Icon connected to CO14 parameter)
"Functions menu" activated
Icon connected to time parameters
(ON when in Functions or Programmation area)
STATUS
ON
ON
Enters the PARAMETER PROGRAMMING MENU
Exits the PARAMETER PROGRAMMING MENU
Generic Alarm
DESCRIPTION
Dryer energized
Circulator running
DESCRIPTION
BUTTON
LED /
ICON
8 - 275