Advertisement
E: Setting Off State Indication
When the dimmer is switched off, the white LED indicators in the dimmer can be set to glow on or turn off.
By Default, the white LED indicators are set to glow on when the dimmer is turned off.
To set the LED indicators to turn off when the dimmer is off, follow the steps below.
Step 1
Enter into the dimmer Setup Mode - See PART A
Step 2
Click the dimmer rotary shaft five times
Step 3
LED will blink 5 times
Note: To cancel/exit do nothing for 30 seconds
Step 4
To set Indicator to glow on when dimmer is off
Adjust the dial Clockwise until the lamp(s) turns ON
To set Indicator to turn off when dimmer is off
Adjust the dial Anti-Clockwise until the lamp(s) turns OFF
Note: To cancel/exit do nothing for 30 seconds
Step 5
Click once to save & exit
Setup Functions - Rotary Dimmer/Switch
7
Advertisement
