Advertisement
H: Setting Multimate™ Dimmer Mode
Step 1
Enter into the dimmer Setup Mode - See PART A
Step 2
Click the dimmer rotary shaft 8 times
Step 3
LED will blink 8 times
a.
If the MultiMate™ function is currently Disabled, lamp(s) connected to
the dimmer will now turn OFF
b. If the MultiMate™ function is currently Enabled, lamps(s) connected to
the dimmer will now turn ON
Note: To cancel/exit do nothing for 30 seconds
Step 4
To Enable MultiMate™ (Default) adjust the dial Clockwise or push-and-hold the
button until the lamp(s) turns ON
To Disable MultiMate™ adjust the dial Anti-clockwise or push-and-hold the button
until the lamp(s) turns OFF
Note: To cancel/exit do nothing for 30 seconds
Step 5
Click once to save & exit
Setup Functions - Rotary Dimmer/Switch
10
Advertisement
