Table of Contents
Advertisement
CLIFC FIXED - INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Maintenance warnings
Before attempting to perform any maintenance work whatsoever on the equipment, it is essential
that the equipment is disconnected and completely isolated from the mains power suppl
WARNING
After disconnection of the mains power supply, a minimum of 1 minute should be allowed for any
rotating parts to come to rest before access panels are removed. However, care should still be
NOTE
taken as it is possible for airflow generated in other parts of the system to cause the fan impellor
to rotate (windmill effect) even when power is not present.
Access panels are not fitted with restraints.
Appropriate PPE should be worn and correct tools should be used when undertaking these various
WARNING
maintenance tasks.
Access panels that are removed for maintenance operations should be placed at floor level in a
safe location until they are ready to be re-fitted. Replace access panels at the same locations and
in the same orientation as found, and ensure that the screw fixings are fastened securely, but not
over-tightened.
If failure of the equipment occurs or is suspected, then it should be taken out of service until the
appropriate maintenance or repair can be undertaken.
6
CLIMA-FLEX
Advertisement
Table of Contents
