Band Selection; Gprs Connection; Bluetooth Settings; Power - Asus J201S User Manual

Band Selection

Depending on your geographic location, one
or more bandwidths are available on a GSM
network. In the Network Settings > Band
Selection option, you can set bandwith
preferences.
Select from 850,1900, or Dual Band.

GPRS Connection

Some users may prefer to use GPRS network
for faster data transmission and support of
multimedia les, such as delivery of polyphonic
ring tones, color graphics, games, and software.
If a GPRS network is available, you can set
your usage preference with the GPRS option
can set through the the Network Settings >
GPRS Connection option.
Highlight the GPRS option and press the
enter key to toggle between Always and When
Needed.

Bluetooth Settings

With the Bluetooth function you can exchange
information between your phone and the
Bluetooth headset.
The Bluetooth Settings menu features include
Power, Search Audio Device, My Device and
Settings. When a device is connected, a fth
option, Disconnect Device, appears on the
menu.
48
To connect a Bluetooth device to your phone for
the rst time:
1. Turn on the Bluetooth device, and then
click Bluetooth Settings > Search
Audio Device to search for Bluetooth
Headphones, or click Bluetooth Settings
> My Device > Option > Search New
Device to search for BT-enables PDA or
PC, and press OK.
2. Once the Bluetooth device is detected,
it is shown on the list of found devices.
Select the BT device you wish to connect
with, and click Pair to pair the device with
your phone. You may be asked to put
in a Bluetooth password to successfully
complete the pairing. The default
password for your phone is 1234.
3. If the pairing is successful, you will be
asked whether or not you wish to add the
Bluetooth device to your trust list. Press
yes or no.
4. After that, you will be asked if you wish to
connect with the device. Press yes or no.
Now the connection is established.
If you add a device to your trust list, you will not
have to go through this whole process again.
Merely highlight the device from the list shown
under Bluetooth Settings > My Device, and
press Option > Connect.

Power

Highlight the Power option from the Bluetooth
menu and press the left soft key
the option On or Off.
to toggle