Table of Contents
Advertisement
Options for Incoming Calls: All Calls, When
Roaming
NOTE: A call barring password is required to make changes to
call barring settings. See your service provider if you don't know
your password.
Line Switching
Depending on your service provider and
SIM card, you may have more than one
line available for use. Although the network
automatically assigns a line to you, you may
also use the Settings > Call Settings > Line
Switching option select a line to use. This
option can be used when line quality differs or
when you have dif culty placing a call because
of busy lines.
To use line switching, select the line switching
option, then press the enter key to toggle
among available lines.
Call Time Reminder
If you want to limit the length of your calls,
use the Settings > Call Settings > Call Time
Reminder option. After the time limit speci ed,
your phone sounds a reminder for you.
To set a call time reminder:
1. Select Single if you want to use a reminder
signal during your call. Select Periodic if
you would like a repeated reminder during
your calls. Press the enter key.
2. A time eld appears. Fill in the number of
seconds after which a reminder should
46
sound, then select OK.
You can choose to turn the function off, turn
it on to sound once during a call, or turn it on
periodically.
Call Time Display
If you would like to monitor or keep track of the
length of your calls, use the Settings > Call
Settings > Call Time Display option. When
enabled, the screen displays the time length of
your calls.
To enable call time display, select the Call Time
Display option, then press the enter key to
toggle the function On and Off.
NOTE: Select Calls > Call Time to see records of call times.
For more information about call times and costs, refer to the
section "Call Time/Cost" in the Call chapter of this manual.
Auto Redial
When the Settings > Call Settings > Auto
Redial option is enabled, the number of the last
call whose dialing has failed will automatically
be redialed.
To activate the Auto Redial option, select it,
then press the enter key to toggle the function
On or Off.
Closed User Group
A closed user group is a service provided by
some service providers that permits network
access by members of the group only. The
Settings > Call Settings > Closed User
Group option enables you to add closed user
groups, edit existing ones, and activate or
Advertisement
Table of Contents
