Table of Contents
Advertisement
Making a call
Follow these steps to place a call:
1.Enter the number you wish to dial using
the keypad. If you make a mistake, select
Clear to delete at any time. The right soft
key
is just under the word Clear on
the lower right screen; use this key to clear
a number.
2.Press the Power/end
the call and return to standby mode.
Alternately, select Abort using the right
soft key
3.Press the Call
after you nish dialing the number.
4.Press the Power/end
the call.
Making International Calls
To dial an international call, do the following:
1. First enter a + by holding down the * key.
2. After the +, enter the international
access code for the country you wish to
dial, followed by the telephone number
including the area code.
22
key to cancel
to cancel the call.
key to connect the call
key to disconnect
Calls
Answering a Call
When you receive a call, the phone alerts
you by sounding the ring tone and vibration
according to the speci ed ring tone and
vibration settings. To answer the call, do the
following:
1. Press the Call
2. Press the Power/end
call and disconnect.
Alternately, select Option > Answer to answer
the call.
Answer Mode
The default setting for the phone is to answer
when you press the Call
can also set the phone to pick up by pressing
any key. To enable the phone to answer a call
by pressing any key, select Manner and then
choose the manner setting that you want.
For example, if you select General, then
choose Personalize > Answer Mode > Any
Key. Set the Any Key option to On to enable
the setting.
Remember to Activate the manner setting to
make sure that the answer mode is set.
key to answer the call.
key to end the
key. However, you
Advertisement
Table of Contents
