Other Problems; Slight Electric Shock When Touching The Printer; Operation Sounds Are Loud; The Adf Does Not Work - Epson WF-2651 User Manual

User's Guide

Other Problems

Slight Electric Shock when Touching the Printer

If many peripherals are connected to the computer, you may feel a slight electric shock when touching the printer.
Install a ground wire to the computer that is connected to the printer.

Operation Sounds Are Loud

If operations sounds are too loud, enable quiet mode. However, this may slow down printer operations.
❏ Windows printer driver
Select On as the Quiet Mode setting on the Main tab.
❏ Mac OS X printer driver
Select System Preferences from the
select the printer. Click Options & Supplies > Options (or Driver). Select On as Quiet Mode.
❏ EPSON Scan
Click Configuration, and then set Quiet Mode on the Other tab.

The ADF Does Not Work

There may be dust in the hole at the front-left of the scanner glass. Clean out any dust.

Scanning from ADF Slows Down

When scanning using ADF continuously for approximately more than five minutes, scanning slows down to
prevent the scanner mechanism from overheating and being damaged. However, you can continue scanning. To
regain normal scanning speed, leave the ADF idle for at least 30 minutes. Scanning speed does not recover if the
power is off.

The Date and Time Are Incorrect

Set the date and the time correctly on the control panel. After a power failure caused by a lightning strike or if the
power is left off for a long time, the clock may show the wrong time.
Related Information
"Setup Mode" on page 18
&

Application Is Blocked by a Firewall (for Windows Only)

Add the application to the Windows Firewall allowed program in security settings on the Control Panel.
Solving Problems
menu > Printers & Scanners (or Print & Scan, Print & Fax), and then
128