Other Scanning Problems; Scanning Is Too Slow; Scanning Slows Down Dramatically During Continuous Scanning; Scanning Stops When Scanning To Pdf/Multi-Tiff - Epson XP-4101 User Manual

User's Guide

Other Scanning Problems

Scanning Is Too Slow

Lower the resolution.
Related Information
"Scanning Using Epson Scan 2" on page 103
&

Scanning Slows Down Dramatically During Continuous Scanning

Scanning slows down to prevent the printer mechanism from overheating and being damaged. However, you can
continue scanning. To return to normal scanning speed, leave the printer idle for at least 30 minutes. Scanning
speed does not return to normal if the power is off.

Scanning Stops when Scanning to PDF/Multi-TIFF

❏ When scanning using Epson Scan 2, you can continuously scan up to 999 pages in PDF format and up to 200
pages in Multi-TIFF format.
❏ When scanning large volumes, we recommend scanning in grayscale.
❏ Increase the free space on the computer's hard disk. Scanning may stop if there is not enough free space.
❏ Try scanning at a lower resolution. Scanning stops if the total data size reaches the limit.
Related Information
"Scanning Using Epson Scan 2" on page 103
&

Other Problems

Slight Electric Shock when Touching the Printer

If many peripherals are connected to the computer, you may feel a slight electric shock when touching the printer.
Install a ground wire to the computer that is connected to the printer.

Operation Sounds Are Loud

If operations sounds are too loud, enable Quiet Mode. Enabling this feature may reduce printing speed.
❏ Control panel
Select on the home screen, and then enable Quiet Mode.
Solving Problems
180