User's Guide
Paper Feeds at a Slant
Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Related Information
"Loading Paper in the Rear Paper Feed" on page 57
&
Several Sheets of Paper are Fed at a Time
❏ Load one sheet of paper at a time.
❏ When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is
loaded in the printer before you reload the paper.
Paper Out Error Occurs
When a paper out error occurs although paper is loaded in the rear paper feed, reload paper in the center of the
rear paper feed.
Paper is Ejected During Printing
When you load letterhead paper (paper on which information such as the sender's name or corporation name are
pre-printed in the header), select Letterhead as the paper type setting.
Power and Control Panel Problems
Power Does Not Turn On
❏ Make sure the power cord is securely plugged in.
❏ Hold down the
P
button for a little longer.
Power Does Not Turn Off
P
Hold down the
button for a little longer. If you still cannot turn off the printer, unplug the power cord. To
prevent the print head from drying out, turn the printer back on and turn it off by pressing the
Power Turns Off Automatically
❏ Select Settings > Basic Settings > Power Off Settings, and then disable the Power Off If Inactive and Power
Off If Disconnected settings.
❏ Select Settings > Basic Settings, and then disable the Power Off Timer Setting.
Solving Problems
159
P
button.