Table of Contents
Advertisement
Installation Guide
Necessary cables when installing two projectors in parallel and using the Easy Interactive Function
When using the interactive function with two projectors installed in parallel, you need the optional remote
control cable set (ELPKC28).
When connecting one computer to two projectors and using the interactive function, connect a USB cable
from the computer to each projector. You need a computer with two USB-A ports.
Necessary cables when installing the Touch Unit
You need the supplied Touch Unit connection cable when installing the Touch Unit and connecting it to the
projector. Operations are not performed correctly with a commercially available cable.
The shape of the plug that connects to the projector and the plug that connects to the Touch Unit differ. See
the following figure to connect to the correct ports.
34
Advertisement
Table of Contents
