Table of Contents
Advertisement
Appendix > Optional Equipment
Optional Function
The applications listed below are installed on this machine.
NOTE
• Restrictions such as the number of times the application can be used during the trial period differ depending on the
application.
• If you change the date/time while using the trial version of an application, you will no longer be able to use the
application.
Starting Application Use
Use the procedure below to start using an application.
Application
Data Encryption (Data Encryption/Overwrite)
*1
UG-33 (ThinPrint Option)
ID Card (Card Authentication Kit)
*1 This can be used on a trial basis for a limited time.
1
[Menu] > [▲] [▼] key > [Op Functions] > [OK] key
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name:
Login Password:
2
Select the desired application, and select the [OK] key.
3
[▲] [▼] key > [License On] > [OK] key
NOTE
You can view detailed information on the selected application by selecting [Detail].
4
[▲] [▼] key > [Official] > [OK] key
To use the application as a trial, select [Trial] without entering the license key.
5
Enter the license key > [OK] key
Some applications do not require you to enter a license key. If the license key entry screen does not
appear, go to Step 6.
6
Select [Yes].
NOTE
If you started the Data Encryption/Overwrite or Thin Print option, turn the power OFF/
ON.
*1
4000
4000
11-5
Advertisement
Table of Contents
Troubleshooting
