Kyocera ECOSYS P4140dn Operation Manual page 48

Installing and Setting up the Machine > Network Setup
When setting the static IP address
1
[▲] [] key > [DHCP] > [OK] key > [▲] [] key > [Off] > [OK] key
2
[▲] [] key > [IP Address] > [OK] key
3
Set the IP address.
NOTE
You can set any value between 000 and 255.
Use the numeric keys or select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the position being entered, which is shown highlighted.
4
Select the [OK] key.
5
[▲] [] key > [Subnet Mask] > [OK] key
6
Set the subnet mask.
NOTE
You can set any value between 000 and 255.
Use the numeric keys or select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the position being entered, which is shown highlighted.
7
Select the [OK] key.
8
[▲] [] key > [Default Gateway] > [OK] key
9
Set the default gateway.
NOTE
You can set any value between 000 and 255.
Use the numeric keys or select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the position being entered, which is shown highlighted.
10Select the [OK] key.
11[▲] [] key > [Auto-IP] > [OK] key
12[Off] > [OK] key
2-17