Table of Contents
Advertisement
Getting started
Setting the date and time
Set the date/time so that the correct date and time can be assigned to incoming calls, and to
enable the alarm to be used.
Date and time are set using the base. The date and time can also be set on an
IP-compatible base via a time server on the network.
If the base permits it, you can set the date and time manually using the handset.
¤
Press the display key Time
or, if the date and time have already been set:
¤
. . . use
OK
The active cursor position flashes
. . . switch between cursor positions with
Enter date:
¤
. . . using
enter the day, month and year in 8-digit format.
Enter time:
¤
. . . using
enter hours and minutes in 4-digit format.
Save settings:
¤
Press the display key Save. . . . Saved is shown in the display and
a confirmation tone sounds.
Return to idle status:
¤
Press and hold the End call key
The telephone is now ready for use.
10
to select
Settings
. . . change cursor position with
Availability and operation of the functions
may differ on your telephone.
OK
Date/Time
Calls
Time
Date/Time
Date:
15.08.2017
Time:
00:00
Back
Save
Advertisement
Table of Contents
