Table of Contents
Advertisement
Baby monitor
When the baby monitor is switched on, the stored (internal or external) destination number is
called as soon as a defined noise level is exceeded in the vicinity of the handset. The alarm to an
external number is cancelled after approximately 90 seconds.
You can answer the alarm using the Two Way Talk function. This function is used to switch the
loudspeaker of the handset located in the baby's room on or off.
In baby monitor mode, incoming calls are only indicated on the display (without ringtone). The
display backlight is reduced to 50%. Advisory tones are deactivated. All keys are locked, with the
exception of the display keys and the ability to press the centre of the control key.
If you accept an incoming call, the baby monitor mode is suspended for the duration of the call,
but the function remains activated. The baby monitor mode is not deactivated by switching the
handset off and on again.
The handset should be positioned 1 to 2 metres away from the baby. The microphone
must point towards the baby.
Activating the function reduces the operating time of your handset. For that reason,
place the handset in the charging cradle if necessary.
The baby monitor is activated 20 seconds after switching on.
The answer machine for the destination number must be switched off.
After switching on:
¤
Test sensitivity.
¤
Test the connection, if the alarm is being forwarded to an external number.
Activating and setting the baby monitor
¤
. . . use
Baby Monitor
Switch on/off:
¤
Activation: . . . use
Enter destination:
¤
Send alarm to
Internal
External:
or select a number from the directory:
Internal:
select the handset
Activate/deactivate two-way talk:
¤
Two Way Talk
Set microphone sensitivity:
¤
Sensitivity
Save settings:
The destination number is displayed in idle display when the baby monitor is activated.
to select
Additional Features
OK . . . then
to select On or Off
. . . use
Number
. . . use
Handset
Change
OK
. . . use
to select On or Off
. . . use
to select High or Low
Save
OK
to select External or
to select number
. . . use
to
Baby monitor
Baby Monitor activated
07:15
14
INT 1
Baby Monitor
0891234567
OFF
Options
Oct
33
Advertisement
Table of Contents
