Table of Contents
Advertisement
Alarm clock
Date and time have been set.
Activating/deactivating the alarm clock and setting the wake-up time
Additional Features
Switch on/off:
Setting the wake-up time:
Set days:
Set the volume:
Set alarm:
Save settings:
When the alarm clock is activated, the icon
display.
Alarm
An alarm is shown on the display and indicated by the selected ringtone melody. The alarm
sounds for 60 seconds. If no key is pressed, the alarm is repeated after 5 minutes. After the
second repetition, the alarm call is deactivated for 24 hours.
During a call, the alarm is only indicated by a short tone.
Switching off/repeating the alarm after an interval (snooze mode)
Deactivate the alarm:
Repeat the alarm (snooze mode):
repeated after 5 minutes.
Baby monitor
When the baby monitor is switched on, the stored (internal or external) destination number is
called as soon as a defined noise level is exceeded in the vicinity of the handset. The alarm to an
external number is cancelled after approximately 90 seconds.
You can answer the alarm using the Two Way Talk function. This function is used to switch the
loudspeaker of the handset located in the baby's room on or off.
In baby monitor mode, incoming calls are only indicated on the display (without ringtone). The
display backlight is reduced to 50%. Advisory tones are deactivated. All keys are locked, with the
exception of the display keys and the centre of the control key.
OK
Activation:
select On or Off
Time
enter hours and minutes
Occurrence
Volume
(increasing volume)
Melody
Save
OFF
Press Snooze or any key . . . the alarm is switched off and
Alarm Clock
OK . . . then
switch between Monday-Friday and Daily
set volume in 5 levels s or select crescendo
select a ringtone for the alarm
and the wake-up time are displayed in idle
Alarm clock
45
Advertisement
Table of Contents
