Baby Monitor (Room Monitoring) - Gigaset easy E295 Manual

Baby monitor (Room monitoring)

When the baby monitor is switched on, the stored external phone numbers or all handsets reg-
istered to the phone (internal) are called as soon as a defined noise level is exceeded in the vicin-
ity of the handset. The alarm to an external number is cancelled after about 90 seconds.
You can answer the alarm using the Two-Way Talk function. This function is used to switch the
loudspeaker of the handset located in the baby's room on or off.
In baby monitor mode, incoming calls are only indicated on the display (without ringtone). The
display backlight is reduced to 50%. Advisory tones are deactivated. Advisory tones are disabled.
All keys with the exception of the display keys are disabled.
If you accept an incoming call, the baby monitor mode is suspended for the duration of the call,
but the function remains activated. The baby monitor mode is not deactivated by switching the
handset off and on again.
The handset should be positioned 1 to 2 metres away from the baby. The microphone
must point towards the baby.
Activating the function reduces the operating time of your handset. For that reason,
place the handset in the charging cradle if necessary.
The baby monitor is activated 20 seconds after switching on.
The answer machine for the destination number must be switched off.
After switching on:
Test sensitivity.
Test the connection, if the alarm is being forwarded to an external number.
Activating and setting the baby monitor
Menu Baby Monitor
Enable/disable:
Activation OK (
monitor is enabled immediately
Entering/changing call number:
Call Target
phone number
Baby Monitor and the number to call are displayed when the baby monitor is enabled and in
idle mode.
Activate/deactivate two-way talk:
Two-Way Talk
OK
= enabled) . . . if a phone number to call is already entered, the baby
OK Select Internal or External Call
OK
OK ( = enabled)
Additional functions
OK for External Call, enter
31