Vga Connector - OLIMEX A20-OLINUXINO-LIME2-EMMC User Manual

OLIMEX© 2015

6.9 VGA connector

You would probably need an adapter cable for the VGA display (6-pin connector to 15-pin female
RGB cable). You can make the cable or the connection yourself or you can purchase the Olimex-
made cable: https://www.olimex.com/Products/Components/Cables/A20-VGA-CABLE/.Note that
you also have to change the script under Debian as explained in chapter 2.6 "Calibrating a display".
Please note that you would need a specific Android image for the VGA output (with proper display
and output settings). We don't provide such image ready at the moment!
The VGA output has been tested only with the official Debian Linux image so far and it works fine
(after selecting the proper mode by executing ./change_display*.sh).
VGA 6-pin connector
Connector Signal name Processor pin
pin #
1 VGA-R
2 VGA-B
3 VGA-G
4 VGA_VSYNC
5 VGA_HSYNC
6 GND
AC17
AB16
AC16
AC9
AB9
-
Back view of the 15 pin connector
Page 37 of 56
A20-OLinuXino-MICRO user's manual
VGA 15-pin connector (back numbering)
Connector pin #
(back numbering)
1
3
2
14
13
6
Color code (according
to the image below)
RED
BLUE
GREEN
BLACK
BROWN
PINK