Table of Contents
Advertisement
3.7.4.2 Alarm Snapshot
a)
Please refer to Step a) to step c) of chapter 3.7.3.2 to enable timing snapshot.
b)
From Main menu->Setting->Storage->schedule, you can go to Figure 3-58 to enable snapshot
function.
c)
From Main menu->Setting->Event->Alarm, you can go to Figure 3-57 to set alarm parameter
and enable snapshot function.
d)
Click Save button to save alarm snapshot setup.
3.7.5 Manual Record/Snapshot
You need to have proper rights to implement the following operations. Please make sure the HDD
has been properly installed.
3.7.5.1 Manual Record
a)
Right
click
Setting->Storage->Manual Record. Manual record menu is shown as in Figure 3-59.
Tips
You can click Rec button on the front panel (if possible) to go to the Manual Record interface.
mouse
and
select
Figure 3-58
manual
record
or
in
the
main
menu,
from
48
Advertisement
Table of Contents
