Data And Time - Dahua NVR6032K User Manual

HDD is no empty, then system stops recording, If the current HDD is full and then next HDD is not
empty, then system overwrites the previous files.

Pack duration: Here is for you to specify record duration. The value ranges from 1 to 120 minutes.
Default value is 60 minutes.

Realtime play: It is to set playback time you can view in the preview interface. The value ranges from
5 to 60 minutes.

Auto logout: Here is for you to set auto logout interval once login user remains inactive for a
specified time. Value ranges from 0 to 60 minutes.

Navigation bar: Check the box here, system displays the navigation bar on the interface.

IPC Time Sync: You can input an interval here to synchronize the NVR time and IPC time.

Startup wizard: Once you check the box here, system will go to the startup wizard directly when the
system restarts the next time. Otherwise, it will go to the login interface.

Mouse property: You can set double click speed via dragging the slide bard. You can Click Default
button to restore default setup.

3.13.2 Data and Time

From Main menu->Setting->System->General->Date and time, you can go to the general interface. See
Figure 3-124.

System time: Here is for you to set system time

Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY.

Date separator: There are three denotations to separate date: dot, beeline and solidus.

DST: Here you can set DST time and date by week or by date. Please enable DST function and then
select setup mode. Please input start time and end time and click Save button.
Figure 3-123
103