Listen To The Radio; Tune To A Radio Station; Program Radio Stations Automatically; Program Radio Stations Manually - Philips NTRX300/77 User Manual

Table of Contents

Advertisement

6 Listen to the
radio

Tune to a radio station

Tip
Position the antenna as far as possible from TV, VCR, or
other radiation source.
For optimal reception, fully extend and adjust the
position of the antenna.
1
Press SOURCE repeatedly to select the
TUNER mode.
2
Press and hold
than two seconds.
» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station:
Press
/
(
you find optimal reception.
Program radio stations
automatically
Note
You can program a maximum of 30 preset radio
stations (FM).
In tuner mode, press and hold PROG
for more than two seconds to activate
automatic programming.
» [AUTO] (auto) is displayed.
» All available stations are programmed
in the order of waveband reception
strength, and the first programmed
radio station is broadcast automatically.
18
EN
/
(
/
) for more
/
) repeatedly until
Program radio stations
manually
1
Tune to a radio station.
2
Press PROG, and then press
select a number from 1–30.
3
Press PROG to confirm.
» [SAVE] (save) is displayed.
4
Repeat steps 2-3 to program more
stations.
Note
To overwrite a programmed station, store another
station in its place.

Select a preset radio station

In tuner mode, press PRESET +/- (
(or press a numeric key directly) to select
a preset radio station.
/
to
/
)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ntrx300

Table of Contents