Adjust Volume Level And Sound Effect; Select A Preset Sound Effect; Enhance Bass; Apply Nitro Boost - Philips NTRX300/77 User Manual

7 Adjust volume
level and sound
effect

Select a preset sound effect

The Sound Control Effect enables you to enjoy
special sound effects.
During play, press SOUND repeatedly to select:
•
[ROCK] (rock)
•
[POP] (pop)
•
[TECHNO] (techno)
•
[SAMBA] (samba)

Enhance bass

The best DBB (Dynamic Bass Enhancement)
setting is generated automatically for each
Sound Control Effect selection. You can
manually select the DBB setting that best suits
your listening environment.
During play, press DBB repeatedly to
•
select:
• DBB 1
• DBB 2
• DBB 3
• DBB OFF

Apply Nitro boost

Nitro Boost effect adds clean and lively
characteristics to your music with very low
background noise.
1
Open the cover on the Nitro Boost
button.
2
Press the Nitro Boost button. The sound
will change in 4 stages:
• Stage 1: [NITRO_05] is display on the
display panel. The system begins to
count down 5 seconds;
• Stage 2: The sound volume increases
to a higher level and stays at this level
for 5 seconds. The display panel shows
[FIRING] (firing);
• Stage 3: The sound volume gradually
decreases to its original level in 10
seconds. The display panel shows
[DISCHARGING] (discharging);
• Stage 4: The sound volume keeps
at normal level for 40 seconds. The
display panel shows [RECHARGING]
(recharging).
Note
•
To reactivate the Nitro Boost effect, press the button
again after the 4 stages are completed.
EN 19