Table of Contents
Advertisement
SOURCE
PIN
NTRX300
0000
1
Press SOURCE repeatedly to select the
Bluetooth source.
» [BT] (Bluetooth) is displayed.
» The power/Bluetooth indicator flashes
blue.
2
On your device that supports A2DP
(Advanced Audio Distribution Profile),
enable Bluetooth and search for Bluetooth
devices that can be paired (refer to the
user manual of the device).
3
Select 'PHILIPS_NTRX300' on your
Bluetooth enabled device and if necessary
input '0000' as the paring password.
» After successful pairing and connection,
the power/Bluetooth indicator turns
solid blue, and the unit beeps twice.
4
Play audio on the connected device.
» Audio streams from your Bluetooth
enabled device to this unit.
Tip
•
The unit can memorize up to 8 previously connected
Bluetooth devices.
To disconnect the Bluetooth-enabled device:
•
Deactivate Bluetooth on your device; or
•
Move the device beyond the
communication range.
To clear Bluetooth pairing history:
•
Pressand hold
seconds.
» The current Bluetooth connection is
disconnected.
» After successful clearing, beep sounds.
on the main unit for 8
EN
17
Advertisement
Table of Contents
