Table of Contents
Advertisement
Setting the screen
STILL MODE
You can set the type of image displayed on the TV
screen when the playback of the DVD is stilled.
Select "STILL MODE" and select the image to be dis-
played from the list below.
AUTOMATIC
The field still or frame still is automatically selected.
(For normal use.)
STILL BY FRAME
The frame still is set.
Note for the field still and frame still:
(with 480i interlaced scanning mode)
• Field* still (240 lines)
Since only one field (half of the video information) is
shown on the TV screen, the picture appears rough
but does not shake.
• Frame* still (480 lines)
Two fields are alternatively shown on the TV screen.
The picture shakes but the resulting picture quality is
superior to the field still pictures.
Field*:
A field refers to the video information in one-
half of a frame. 1 frame (screen) consists of 2
fields.
Frame*: A frame refers to the total area occupied by
each picture on the TV screen.
NO NOISE BACKGROUND
When you select a channel where the broadcast has
finished or no broadcast is set, the TV screen will auto-
matically appear blue.
The function above works when you select "NO NOISE
BACKGROUND" and select "ON" from the list. If you
don't want to use this blue background function, select
"OFF".
The default setting is "ON".
BRIGHTNESS
You can control the brightness level of the image.
Select "BRIGHTNESS" and select the level from the
list below.
MAX: The image becomes brighter.
STD: The image is of standard brightness.
MIN: The image becomes darker.
DVD OUTPUT
You can select the output signal of DVD playback pic-
ture to the TV screen as an RGB signal or a COMPOS-
ITE signal.
COMPOSITE: COMPOSITE VIDEO signal
RGB: RGB signal
AV3 INPUT
You must select the input mode of AV3 (front AV-in-
put). (see the upper connection on P.75)
Only the S-Video signal will be in-
S-VIDEO:
put. (Composite video signal will be
cut.)
VIDEO:
Only the composite video signal will
be input. (S-Video input signal will
be cut.)
25
Advertisement
Table of Contents
