Grizzly G0893 Manual page 12

G
Figure 2. Fence controls.
G. 45° Outward (135°) Fence Stop: Stops
fence at 45° outward (135°) position for bevel
cuts.
Note: Even when fence is resting against
stops, tilt locks must be tightened before
starting machine.
H. Fence Tilt Lock Lever: Secures fence tilt
angle. Fence can be quickly set to 90° (per-
pendicular to both tables), 45° inward, and
45° outward (135°) by setting and using fence
stops on bracket assembly.
I. Fence Carriage Lock Lever: Tightens to
secure fence position; loosens to allow lat-
eral adjustment. ALWAYS firmly tighten lock
before beginning operations.
J. Dust Port: Mounts to included collection
bag, or connects directly to a dust collector
or shop vacuum.
Model G0893 (Mfd. Since 03/19)
H
I
J
K
M
Figure 3. Fence carriage components.
K. 45° Inward Fence Stop: Stops fence at 45°
inward position for bevel cuts.
Note: Even when fence is resting against
stop, tilt locks must be tightened before start-
ing machine.
L. Limit Block: Features indents to quickly
adjusts angle of fence carriage to 90°.
M. Limit Plate: Locks into limit block indents at
preset fence angles to set a starting angle
prior to precision adjustments.
L
-5-